Safety Data Sheet

3D Gloop! products safety data sheets (SDS) are always available for download. (located below) 

Please navigate to the specific product and click on the document preview to review the data sheet. 

3D Gloop! reserves the right to update any information on this page or contained in the supplied SDS documents for our products without notice. Use of any 3D Gloop! product is at your own risk.

3D Gloop! is not responsible for any missuses or mishandling of products.  

 
 
 
  Click to view MSDS in browser

Click to view MSDS in browser


 

PLA 3D Gloop!

PLA 3D Gloop! is a specialty formulated adhesive compound designed for adhering 3D prints to build platforms of 3D printers during the process of 3D printing. Additionally, PLA 3D Gloop! may be used for bonding other 3D prints of like materials together post print or used as a smoothing filler.

PLA 3D Gloop! contains dissolved nano-particles of PLA along with strong solvents, stabilizing agents, and proprietary synthetic ingredients. Expert care and caution are required when handling, using, and storing PLA 3D Gloop! 

STORAGE: Keep container tightly closed. Keep container sealed in safety bag when not in use. Keep container in a cool, well-ventilated area.

PRECAUTIONS: Keep locked up. Keep away from children. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk. Container may become pressurized. Do not open container pointing towards face. Ground all equipment containing material. Do not ingest. Do not breathe gas/ fumes/ vapor/spray. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes.

POTENTIAL HEALTH EFFECTS: Very hazardous in case of eye contact (irritant), of ingestion, of inhalation. Hazardous in case of skin contact (irritant, permeator). 

California Residents: see Proposition 65 Information


ABS 3D Gloop!

ABS 3D Gloop! is a specialty formulated adhesive compound designed for adhering 3D prints to build platforms of 3D printers during the process of 3D printing. Additionally, ABS 3D Gloop! may be used for bonding other 3D prints of like materials together post print or used as a smoothing filler.

ABS 3D Gloop! contains dissolved nano-particles of ABS along with strong solvents, stabilizing agents, and proprietary synthetic ingredients. Expert care and caution are required when handling, using, and storing ABS 3D Gloop! 

STORAGE: Keep container tightly closed. Keep container sealed in safety bag when not in use. Keep container in a cool, well-ventilated area.

PRECAUTIONS: Keep locked up. Keep away from children. Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk. Container may become pressurized. Do not open container pointing towards face. Ground all equipment containing material. Do not ingest. Do not breathe gas/ fumes/ vapor/spray. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes.

POTENTIAL HEALTH EFFECTS: Very hazardous in case of eye contact (irritant), of ingestion, of inhalation. Hazardous in case of skin contact (irritant, permeator). 

California Residents: see Proposition 65 Information

 

 
  Click to view MSDS in browser

Click to view MSDS in browser